The ducted air conditioning is designed to provide the air conditioning through the ducts of the house and therefore, this is used to cool up the entire space where the ducts are present. These are immensely used in the residential and commercial properties and the ducted air conditioning installation must be done correctly in order to provide the optimal performance and cooling. This article discusses the guide point for the installation that would prove to be helpful for you.
Preparation of the house:
Since the installation through the duct would cause the dust and debris to fall out and therefore, the house owner should put the disposable or spare clothes on the furniture to cover these. Although usually, the installation team uses the plaster sheet to cover the furniture etc. Then what the home owner needs to do is to decide the location where the outdoor unit of the ducted air conditioning will be placed. There should be certain considerations while deciding the location of the outdoor unit such as it should be away from all bedrooms you and your neighbours as well because it emits heat and could be noisy and then this should also be away from the outdoor living area and should be close to the switchboard to improve practicality. The professionals could also suggest you the location of the outdoors and in most of the cases, based on their experience, they will guide you better.
The professional team usually come early in the day and there are usually three to four people in a team and it depends on the size of the ducted air conditioning installation.
Stages of installation:
First of all, the ducted air conditioning installation team will determine the locations of the indoors and layout design of the ducts to plan the outdoor location and they also will get the suggestion from you as well. Then the ceiling is cut to be used for further stages. Then the indoor is assembled and its different components are fit. After that the roof is suspended so that the vibrations are avoided and then the safety trays and the drains are installed as well. Then the outdoor units are placed and connected. The next steps include the holes drilling for the installation of the diffusers. Furthermore, some other components such as the return air ducts, control cables are installed. After everything is in place, the ducted air conditioning is turned on and each component is checked and tested to see if it is working as supposed to. The home owners are also given some days to check the working and in case they feel any issue or problem they can call the team again to get it fixed. For more information please click here.